Using your template modify the following: Layer Management modifications
Layer Name Color Linetype Lineweight
Visible Blue Continuous 0.6 mm
Hidden Yellow HiddenX2 0.3 mm
Centerline Red Center 0.3 mm
Text Red Continuous 0.3 mm
Dimensions Red Continuous 0.3 mm
Titleblock Red Continuous 0.6 mm
• Set Units to decimal and precisions to 0.000.
• Draw object within the set limits of 0,0 lower left corner and 24,18 for upper right corner.
• Set LTS to ensure linetypes appear correctly. (Hint: LTS will not equal 1)
• Set text style to Romans font.
• Set dimension style per parameters below and dimension views accordingly.
Dimension Style Tab Setting Value
Lines Extend beyond dim lines 0.125
Symbols & Arrows Arrow size 0.08
Center marks Line
Text Text Height 0.08
Text Style Standard (font should be set to Romans)
Fit Annotative Check Annotative box
Primary Units Precision 0.00
Zero suppression Leading
• Draw the front, top, and right side views of the Flange #1105 shown in the designer’s sketch.
• Add text as follows:
NOTES- UNLESS OTHERWISE SPECIFIED:
1. MATERIAL SPECIFICATION- MILD STEEL
2. INTERPRET DIMENSIONING, TOLERANCING, AND SYMBOLS IN ACCORDANCE
WITH ASME Y14.5-2014

• The note .125 x.125 Chamfer should be annotated using the Diameter dimension with the GDT
symbols for countersink w and depth x :
∅1.75w45°
∅1.50×1.75
• After completing the drawing, plot drawing as a pdf from the Layout tab displaying the Titleblock
make sure the drawing is set to proper scale and the scale is listed.
• Upload drawing and pdf to Canvas.
Isometric View – Create the Front, Top and Right Side View
Section View – Used to display interior of object and provide dimensions for creating the Front, Top and Right
Side View